秒速时时彩

新闻资讯

热风炉的正确选择有利于节约成本提率!

2019-12-23 来源:http://www.jianmosc.com 发布人:众焱小编 浏览量:
[导读]:  各种热空气炉都有其特定的适用范围,如选择不当,除了承担不必要的一次性采购成本高,而且在整个使用期间付出沉重的代价,如低功率、高能源...
  各种热空气炉都有其特定的适用范围,如选择不当,除了承担不必要的一次性采购成本高,而且在整个使用期间付出沉重的代价,如低功率、高能源消耗、高运营成本,产品质量差,甚至设备不能正常运行等等。可以按照以下原则选择合适的热风炉:
  All kinds of hot air furnaces have their specific scope of application, such as improper selection, in addition to bearing unnecessary high one-time purchase cost, and pay a heavy price during the whole use period, such as low power, high energy consumption, high operation cost, poor product quality, and even equipment can not operate normally, etc. The suitable hot blast stove can be selected according to the following principles:
  1. 节省投资——要完成相同功能的热风炉设备,有时其成本差,应选择其低选择。
  1. Saving investment: to complete the same function of hot blast furnace equipment, sometimes its cost is poor, it should choose its low choice.
  2. 适用性,热空气炉的设备必须首先适用于特定的材料,并满足热空气炉的基本应用程序需求,包括良好的处理材料(饲料、运输、流化、松弛、传热、放电,等等),而且可以满足治疗的基本要求体积,脱水,产品质量,等等。
  2. Applicability: the equipment of the hot air furnace must first be suitable for specific materials, and meet the basic application requirements of the hot air furnace, including good processing materials (feed, transportation, fluidization, relaxation, heat transfer, discharge, etc.), and can meet the basic requirements of treatment, such as volume, dehydration, product quality, etc.
  3.高速热空气炉——只在热空气炉的速度方面,对流热空气炉时,材料是高度分散在炎热的空气中,临界含水率低,热空气炉的速度快,而且是一样的对流热空气炉、热空气炉的临界含水率的方法是不同的,所以热空气炉的速度是不同的。
  3. High speed hot air furnace - only in terms of the speed of the hot air furnace, when the convection hot air furnace is used, the material is highly dispersed in the hot air, the critical moisture content is low, the speed of the hot air furnace is fast, and the same method of the critical moisture content of the convection hot air furnace and the hot air furnace is different, so the speed of the hot air furnace is different.
  4. 低能耗——不同的热风炉方法有不同的能耗目标。一般导热热风炉的热工功率理论上可以达到100%,而逆流热风炉的热工功率只能达到70%左右。
  4. Low energy consumption - different hot blast furnace methods have different energy consumption targets. In general, the thermal power of heat conduction hot blast furnace can reach 100% in theory, while the thermal power of countercurrent hot blast furnace can only reach about 70%.
热风炉生产厂家
  5. 低运营成本——设备折旧、能源消耗、人工成本、维护成本、备件成本……如经营成本要尽可能的低。
  5. Low operating cost - equipment depreciation, energy consumption, labor cost, maintenance cost, spare parts cost For example, the operating cost should be as low as possible.
  6. 优先选择结构简单、备件充足、可靠性高、使用寿命长的热风炉设备。
  6. The hot blast stove with simple structure, sufficient spare parts, high reliability and long service life is preferred.
  7. 符合环保要求,工作条件好,安全性高。
  7. Meet the requirements of environmental protection, good working conditions and high safety.
  8. 在材料选择前更好做热风炉试验,以便加深对同类材料使用热风炉设备(优缺点)的了解,这往往有助于正确选择。
  8. It is better to conduct hot blast furnace test before material selection, so as to deepen the understanding of using hot blast furnace equipment (advantages and disadvantages) for similar materials, which is often helpful for correct selection.
  9. 不要完全依赖过去的经验,重视对新技术的吸收,听取专家的意见。
  9. Don't rely entirely on past experience, pay attention to the absorption of new technologies and listen to the opinions of experts.
返回顶部

版权所有©山东众焱机械有限公司 备案号: 服务热线:18005415007 流量统计:

比特棋牌app下载 秒速时时彩官网 秒速时时彩 比特棋牌 比特棋牌 聚发彩票app 新天地彩票注册 秒速时时彩官网 大发棋牌 大发棋牌下载